46
TH-103PF12E
3. Remove 2 screws ( ).
4. Remove 2 screws ( ) and then slide the Side Power Unit
upward.
5. Remove the Side Power Unit.
6. Remove 24 screws and then remove Cabinet Block.
7. Pull the bottom of the Cabinet Block forward and lift.
8. Remove the Cabinet Block.
9. Remove each 4 screws (R) of the Plates.
10. Remove 3 Eye Bolts.
11. Remove 6 Eye Bolt Covers.
12. Remove 4 screws and then remove the Rear Cover
Angles (H).
To Next Page
Loading...
