Panasonic TH-103PF12E - Page 43

43
TH-103PF12E
9.37.1. Removal of Front Glass
1. Remove 44 screws and then remove the Fixed Angles
(left, right, upper, lower).
2. Remove the Front Glass.
Note: when fixing Fixed Angle
• Screw on 4 screws (1) firstly.
(Note)
• When removing the Front Glass from Cabinet, there
is a risk of the glass center bending damage.
• Be sure to lift the instruction six positions of the fig-
ure, when remove the Front Glass.
Note: when Cabinet or Front Glass is exchanged
• You need new Aluminum Tape kit when you exchange
the Cabinet or Front Glass.
Note: when Front Glass is exchanged
• Paste the Sponges in order along each Fixed Angles
(left, right, upper, lower).
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.