Section 700 - Operation Chapter 3. System Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 Page 3-61
Trunk Groups
(All Versions)
Description
Trunks can be placed in trunk groups. When a trunk group is accessed, the
DBS automatically selects an open trunk from the group.
Operation
To access a trunk group, do one of the following:
• Dial a trunk group access code before dialing the telephone number. Trunk
group access codes are 9, 81, 82, 83, 84, 85, and 86.
• Press an FF key that is assigned as a pooled trunk key.
Related Programming
• FF2 (Trunks): Pooled Trunk Access for Group “9”
• FF2 (Trunks): Pooled Trunk Access for Groups “81-86”
Considerations
• Trunks can appear in more than one trunk group.
• If Least Cost Routing is enabled, the trunk group “9” automatically
accesses the LCR features.
To Next Page
Loading...
