Section 700 - Operation Chapter 6. SLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 6-5
calls are routed to the extension defined in permanent call forwarding.
The following types of incoming trunk calls follow permanent call forward
settings:
- Direct trunk calls (including DID/DNIS)
- Transferred trunk calls.
• When an Absence Message is set on a DID extension, incoming DID calls
are routed according to the ringing assignment programmed for the
incoming trunk.
Busy Override
(All Versions)
Description
Extensions in the same Paging Group (1-7) can break into one another’s
outside calls or intercom calls to relay information or to create three-party
Conference Calls.
Operation
Press “4” when you hear the busy tone.
An alert tone is issued at both phones.
Related Programming
• FF1 (System): Alert Tone for Busy Override & OHVA
• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B
Version 3.1 or higher)
• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and
CPC-B Version 3.1 or higher)
• FF3 (Extension): Busy Override Send
• FF3 (Extension): Busy Override Receive
• FF3 (Extension): Extension Page Group
To Next Page
Loading...
