Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 5-29
Message Waiting/Callback Request
(All Versions)
Description
If you call an extension that is busy or does not answer, you can leave a
message requesting a return call.
Operation
To leave a Message Waiting/Callback Request:
1. Lift the handset.
2. Dial the extension number.
3. Dial “2” at the busy tone or while the telephone is still ringing.
4. Replace the handset.
To answer a Message Waiting/Callback Request:
1. Pick up the handset.
The phone issues intercom dial tone.
2. Press the
AUTO
key.
3. Press the
REDIAL
key.
Your telephone automatically dials the extension that left the Callback
Request.
To cancel a Callback Request:
1. Lift the handset or press
ON/OFF
.
2. Press the
AUTO
key.
3. Press the
FLASH
key.
4. Replace the handset or press the
ON/OFF
key.
To Next Page
Loading...
