Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 5-15
Group Call Pickup
Description
Use the Group Call Pickup feature, to answer calls to other extensions within
your Paging Group (01-07) without entering the number of the extension that
is ringing.
Operation
1. Lift the handset.
2. Dial “70.”
Related Programming
• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B
Version 3.1 or higher)
• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and
CPC-B Version 3.1 or higher)
• FF3 (Extension): Extension Page Group
Considerations
• If more than one call is arriving at the Paging Group, the Group Call
Pickup feature will answer the call to the lowest-numbered port first.
• If the called extension belongs to more than one Paging Group, the Group
Call Pickup Feature will answer the call to the lowest-numbered Paging
Group first.
• You can answer incoming calls, Intercom Tone Calling, or Intercom Voice
Calling using the Group Call Pickup feature. You cannot answer Paging or
Callback with this feature.
• Group Call Pickup cannot be used to pick up a ringing phone in Paging
Group 00. For example, if an extension is a member of Paging Groups 00
and 06, the extension can use Group Call Pickup to answer ringing calls in
Group 06, but not in Group 00.
To Next Page
Loading...
