EasyManua.ls Logo

Panasonic VB-44210G - Multi-Line (ML) Appearances

Panasonic VB-44210G
394 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 700 - Operation Chapter 4. Key Telephone Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 4-65
Multi-Line (ML) Appearances
(CPC-AII and CPC-B Version 2.0 or higher)
Description
You can make and receive both CO line calls and Intercom Calls using a
Multi-Line (ML) key. Each extension can have up to 24Multi-Line keys. The
Attendant can have up to 24 Multi-Line keys.
See “ML/MCO Separation” (page 4-66) for information on assigning both
ML and MCO keys to the same system (CPC-AII and CPC-B Version 4 or
higher).
Operation
Related Programming
FF1 (System): Least Cost Routing (LCR) Access
FF2 (Trunks): Pooled Trunk Access for Group “9”
FF2 (Trunks): Pooled Trunk Access for Group “81-86”
FF3 (Extension): Forced Least Cost Routing
FF5 (Keys): FF Key Assignment (all)
FF8 (LCR) LCR Settings (all)
Considerations
A Multi-Line key will ring for incoming CO calls, Intercom Calls, recall
calls, and call-forward calls.
Operation Action
To originate a trunk call Press an idle ML key.
The key blinks (green) as the call is
made.
To place a call on Exclusive Hold (page 4-37) Press the ML key.
To place a call on System Hold (page 4-18) Press the
HOLD
key.
To transfer a call Press
HOLD
, dial the destination exten-
sion, then press
PROG
.

Table of Contents

Related product manuals