Section 700 - Operation Chapter 4. Key Telephone Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 4-25
• You can answer incoming calls, Intercom Tone Calling, or Intercom Voice
Calling using the Group Call Pickup feature. You cannot answer Paging or
Callback with this feature.
Call Transfer
(All Versions)
The DBS provides two call transfer methods: blind transfer and screened
transfer.
Blind Transfer
Description
Blind transfer allows the transfer of a call directly to an extension, without
waiting for the called extension to answer.
Operation
1. Press the
HOLD
key to place the outside call on hold.
• The line LED for the outside line on hold flashes green.
• The phone issues intercom dial tone.
• “Hold #XX” (where “XX” is the line number) appears on the display.
2. Dial the extension number to which the call is to be transferred.
“Call-EXT XXX” (where “XXX” is the extension number) appears on
the display.
3. Replace the handset before the other party answers.
• You can also replace the handset after the third party answers.
• The LED for the original outside line turns red when the call has been
transferred.
• “Transf XXX #YY” (where “XXX” is the extension and “YY” is the
line) appear on the display.
• The third party need only pick up the handset to speak to the outside
line.
To Next Page
Loading...
