Chapter 6. SLT Features Section 700 - Operation
6-28 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Message Waiting/Callback Request
(All Versions)
Description
If you try to call an extension that is busy or does not answer, you can leave a
message requesting a return call.
Operation
To leave a Message Waiting/Callback Request:
1. Lift the handset.
2. Dial the extension number.
3. Dial “2” at the busy tone or while the telephone is still ringing.
4. Replace the handset.
To answer a Message Waiting/Callback Request (CPC AII and CPC-
B only):
1. Pick up the handset.
The phone issues a stutter dial tone followed by constant dial tone.
2. Dial “##.”.
Your telephone automatically dials the extension that left the Message
Waiting Callback Request.
To cancel a Message Waiting/Callback Request (CPC-AII and CPC-
B only):
1. Lift the handset.
2. Dial “
#*
”.
3. Replace the handset.
To Next Page
Loading...
