Section 700 - Operation Chapter 2. Attendant Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 2-21
the personal VM key is not assigned to the lowest-numbered key, it will not
flash to indicate VM messages.
Station Lockout Code Assignment
(All Versions)
Description
The Station Lockout feature allows users to dial a Station Lockout code to
restrict their phone from being used for outside calls.
Station Lockout codes can be assigned through the attendant phone.
Operation
To program a Station Lockout code:
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.
2. Press the
CONF
key.
3. Dial “#8.”
4. Dial the extension number.
5. Enter the desired key code (four digits).
6. Press the
HOLD
key.
“STORE XXXX” (where “XXXX” is the key code) appears on the
display.
7. Press the
ON/OFF
key.
The
ON/OFF
LED goes off.
Considerations
• A locked extension can be used for Intercom Calls.
• Station Lockout key codes can also be set through system programming.
To Next Page
Loading...
