Section 700 - Operation Chapter 3. System Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 Page 3-17
Related Programming
• FF1 (System): Multiple DID (CPC-B Version 3.1 or higher)
• FF3 (Extension): Inbound DID Dial Number (CPC-B Version 2.0 to 2.16)
• FF4 (Ring): DID, Delayed, Night , Delayed Night, Night 2, and Delayed
Night 2 Ring Assignments
Hardware Requirements
• Either the T-1 Card or DID trunk card is required. Each DID trunk card
provides 8 ports.
• The DID trunk card requires an external 48V power supply. See
Installation (Section 300) for instructions.
Considerations
• The DID Trunk card supports 4-digit, dial-pulse DID.
• The T1 card supports 4-digit, dial-pulse or DTMF DID.
• DID numbers must be between 0000 and 9999.
• Beginning with CPC-B Version 3.1, a maximum of 500 DID/extension
settings is allowed.
DID Night Ringing Assignment
(CPC-B Version 5.0 or higher)
Description
For a description of this feature, see “DID/DNIS Flexible Ring Assignments”
on page 3-18.
To Next Page
Loading...
