EasyManua.ls Logo

Panasonic VB-44210G - Dial Tone Disable; Direct Trunk Access

Panasonic VB-44210G
394 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5. DSLT Features Section 700 - Operation
5-24 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Dial Tone Disable
(All Versions)
Description
The intercom dial tone can be turned off at a phone. Dial tone is turned off
when a headset is used.
Operation
To disable the intercom dial tone:
1. Press the
ON/OFF
key.
The phone issues intercom dial tone.
2. Press “#50.”
3. Press the
ON/OFF
key.
To reactivate dial tone:
Repeat the preceding steps.
Direct Trunk Access
(All Versions)
Description
Extension users can access specific trunks for outgoing calls. Extension users
can also use Direct Trunk Access to test trunks or to access data trunks.
Operation
1. Lift the handset.
2. Dial “88” followed by the desired trunk number (01-64).
3. Dial the outside number.

Table of Contents

Related product manuals