EasyManua.ls Logo

Panasonic VB-44210G - ML;MCO Separation

Panasonic VB-44210G
394 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4. Key Telephone Features Section 700 - Operation
4-66 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
When a CO call or an Intercom Call arrives, a search begins for a Multi-
Line key not in use. The lower numbered FF keys will be searched first.
When a free Multi-Line key is found, the LED flashes green and the
extension rings.
If another phone answers an incoming trunk call, the ML LED on your
extension goes off and the ringing stops, indicating that the Multi-Line key
on your telephone is no longer in use.
When dialing an extension number, the system automatically selects the
free Multi-Line key with the lowest number.
If the CO line or held extension does not respond before the Recall Timer
expires, the extension rings and the Multi-Line key flashes green.
If LCR is enabled, ML keys can be assigned for trunk group 89. However,
the FF keys will not light.
ML/MCO Separation
(CPC-AII and CPC-B Version 4.0 or higher)
Description
Beginning with CPC-B Version 4, each extension can have either MCO or
ML keys. In previous software versions, MCO or ML keys were only
available on a system-wide basis, and the type of key that was available
differed according to the software release. Table 4-7 contains definitions of
MCO and ML keys. Table 4-8 shows MCO/ML availability with previous
releases.
Table 4-8. MCO/ML availability
Related Programming
FF3 (Extension): ML/MCO Separation
FF5 (Keys): FF Key Assignments (all)
CPC Version Type of
Key
CPC-A MCO only
CPC-B 1.0 MCO only
CPC-B 2.0 - 3.1 ML only
CPC-AII and CPC-B
4.0 and above
MCO or ML

Table of Contents

Related product manuals