Panasonic VB-44210G - Call Forward ID Code for Voice Mail

Section 700 - Operation Chapter 3. System Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 Page 3-13
Call Forward ID Code for Voice Mail
(CPC-A Version 3.1, CPC-AII, and all CPC-B Versions)
Description
Call Forward ID Code for Voice Mail allows users to call forward to a third-
party voice mail system. The ID Code sends the digits that are required by the
voice mail to identify the DBS extension and allow it to retrieve messages.
With CPC-A or CPC-B Version 1.0, you can only set the ID Code from the
phone to be forwarded. Beginning with CPC-B Version 2.0, ID Codes can be
set from any key phone; this is also true of CPC-AII.
Operation
To set a Call Forward ID Code for Voice Mail:
1. Press the
PROG
key.
2. Press the
AUTO
key.
3. Press “*.”
4. If you are using CPC-AII or CPC-B Version 2.0 or later, enter the
extension number to be forwarded. If you are using CPC-A or CPC-B
Version 1.0, go to Step 5.
5. Enter up to 16 digits (0-9) for the mail box ID code. (Press the
REDIAL
key to insert a pause.)
6. Press the
HOLD
key.
To clear the ID Code:
1. Press the
PROG
key.
2. Press the
AUTO
key.
3. Press “*.”
4. Enter the extension number.
5. Press the
HOLD
key.