Chapter 6. SLT Features Section 700 - Operation
6-4 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
To Cancel an Absence Message
1. Lift the handset.
2. Dial “71.”
3. Replace the handset.
Related Programming
• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B
Version 3.1 or higher)
• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and
CPC-B Version 3.1 or higher)
• FF6 (Names and Messages): Absence Messages
Considerations
• Extensions without displays get a busy signal, rather than the Absence
Message.
• If a message code number that has not been assigned a text message is
selected, “Absence,” followed by the code number, appears on the caller’s
display.
• Absence Message return times can be entered as shown in Table 6-2:
Table 6-2. Example Return Times for Absence Messages
Four-digit numbers can also be entered (0000-9999 = Hours & Minutes or
Month & Date).
• In CPC-A and CPC-B Versions prior to 5.0, DND and Absence Messages
cancel Call Forwarding.
Beginning with CPC-B Version 5.0, calls to extensions with DND or
Absence Message turned on are treated differently, depending on whether
they are trunk or intercom calls. Intercom calls receive busy tone; trunk
Input Display
No input Return
9 Return 9:00
11 Return 11:00
615 Return 6:15
1035 Return 10:35
To Next Page
Loading...
