Panasonic VB-44210G - Page 206

Chapter 4. Key Telephone Features Section 700 - Operation
4-90 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
2. Press the
CONF
key.
“C” appears on the display.
3. Press a Personal Speed Dial key.
The programmed data appears on the display.
4. Press the
ON/OFF
key.
The
ON/OFF
LED goes off.
To assign a name to a Personal Speed Dial number:
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.
2. Press the
PROG
key.
3. Press “#1.”
“Speed Dial Name” appears on the display.
4. Press the
AUTO
key.
5. Enter the Personal Speed Dial bin number (90-99 or 900-909).
6. Press
AUTO
to backspace and erase the existing name.
7. Use the dialpad sequences shown in Table 2-1 on page 2-10 to enter
letters and/or numbers.
• Press
FLASH
after each letter.
• Press
CONF
to switch between numbers and letters.
8. To complete the entry, press
HOLD.
To delete a Personal Speed Dial number:
1. Press
ON/OFF
.
2. Press
PROG
.
3. Press the One-Touch key.
4. Press
HOLD
.