Panasonic VB-44210G - Page 227

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 5-9
Operation
To activate Call Forwarding:
1. Lift the handset or press
ON/OFF
.
The phone issues intercom dial tone.
2. Dial “72.”
3. Dial the appropriate call forwarding code.
Note:
Beginning with CPC-AII and CPC-B Version 7.0, all forwarding
types (All Calls, No Answer, Busy, Busy/No Answer) allow call
forwarding outside eliminating the need for Call Forwarding--External.
4. If you are forwarding to an extension, enter the extension number. If you
are forwarding to an outside number, press
AUTO
plus the appropriate
speed dial number.
Note:
Outside numbers used for call forwarding must already be
programmed into speed dialing. (See page 5-35 for instructions.)
5. Replace the handset or press
ON/OFF
.
To cancel Call Forwarding
1. Lift the handset or press
ON/OFF
.
2. Dial “72.”
3. Replace the handset or press
ON/OFF
.
Related Programming
• FF1 (System): Call Forward No Answer Timer
Call Forward
Type
Code
All 0
Busy/no answer 1
Busy 2
Outside 3
No answer 4