Panasonic VB-44210G - Page 29

Section 700 - Operation Chapter 2. Attendant Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 2-9
6. Press
AUTO
to backspace and erase the existing name.
7. Use the dialpad sequences shown in Table 2-1 on page 2-10 to enter
letters and/or numbers.
Press
FLASH
after each letter or number.
Press
CONF
to switch between numbers and letters.
8. To store your entry, press
HOLD.
Note:
The name does not change on the extension until the extension goes off
hook.
To assign text to Call Waiting/OHVA Text Replies (CPC-AII and CPC-
B Version 4.0 or higher):
1. Pick up the handset or press
ON/OFF
.
2. Press
PROG
.
3. Dial #5
4. Dial 1-5, depending on which text message you want to change.
5. Press
AUTO
to backspace and erase the existing name.
6. Use the dialpad sequences shown in Table 2-1 on page 2-10 to enter
letters and/or numbers.
Press
FLASH
after each letter.
Press
CONF
to switch between numbers and letters.
7. To store your entry, press
HOLD.