Section 700 - Operation Chapter 2. Attendant Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 2-15
Figure 1-2. VB-43225 with a DSS/72 configured as an Attendant Console
Related Programming
• FF1 (System): Attendant Feature Package Settings
Note:
Beginning with CPC-B Version 5.0, the Attendant Feature Package
(AFP) is no longer provided.
• FF3 (Extensions): Terminal Type
Hardware Requirements
• The “Attendant Feature Package” is required to configure the DSS/72 as an
Attendant Console. The “Attendant Feature Package” is contained on a
special EPROM chip that replaces an EPROM on the CPC-B card.
Note:
Beginning with CPC-B Version 5.0, the Attendant Feature Package
(AFP) is no longer provided.
• The following table shows the number of DSS/72s and or Attendant
Consoles that can be used.
To Next Page
Loading...
