Appendix I. CPC-EX 2.3 Feature Update Section 700-Operation
Page I-18 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
6 Billing name
7 Billing address
8 Long distance Carrier
InterLATA (PIC)
Identifies the carrier who will provide long
distance access.
9 Long distance Carrier
(IntraLATA) (LPIC)
Identifies the carrier who provides access for con-
nections that are not local but are still within the
local LATA.
1
0
Request date of installation
1
1
Facility type ISDN PRI
1
2
Facility quantity 1 or 2 spans
NOTE
: The following items must be provided on a per span basis.
1
3
Signaling code DS-1 (1.544 Mbps)
1
4
Line coding B8ZS (Binary 8 Zero Substitution)
1
5
Framing Format ESF (Extended Superframe)
1
6
Bearer configuration Voice or Voice/Data
1
7
Quantity of B (bearer)
channels
23B + 1D - Max. setting (must have 1 D channel)
Or XB + 1D where X is 1-23 for a fractional span
1
8
Call type Two Way
1 Quantity of phone numbers A block of 20 numbers is generally assigned.
9
Note
: With DID, the total number of telephones
will exceed the total number of B channels.
2
0
Number of incoming digits
to CPE (Customer Premise
Equipment - DBS)
Select 4 digits. Used with DID
2
1
ISDN PRI Protocol 5ESS Custom, DMS-100 Custom (NTNAPRI) or
4ESS
2
2
Glare Resolution CPE yield to CO
2
3
Channel selection used by
CO
High-to-Low B-channel selection
# Typical Info for CO Comments (examples)
To Next Page
Loading...
