Panasonic VB-44210G - Page 392

Index-6 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Index Section 700 - Operation
absence message 6-3
blind transfer 6-14
busy override 6-5
call forwarding 6-6
call hold 6-10
call park 6-11
call pickup 6-12
call transfer 6-14
call waiting 6-17
camp-on 6-19
conference calls 6-20
dial "0" for attendant 6-21
direct call pickup 6-12
direct trunk access 6-23
DND 6-23
group call pickup 6-13
intercom calling 6-25
last number redial 6-26
meet-me answer 6-27
message waiting/callback request 6-28
OHVA 6-29
personal speed dialing 6-31
pooled trunk access 6-30
screened transfer 6-15
speed dialing 6-31
system speed dialing 6-32
SMDR 4-51
Speed dialing
attendant assignment of 3-3
DSLT 5-35
key telephone 4-88
linking numbers 4-94
personal 4-88, 6-31
SLT 6-31
system 4-92, 6-32
Station class of service 4-45
Station hunting
all versions 4-46
circular 4-47
CPC-B 2.0 and higher 4-49
distributed 4-49
longest idle 4-49
terminal (CPC-A and CPC-B below 2.0) 4-
47
terminal (CPC-B 2.0 and higher) 4-49
Station lockout 4-96
code assignment 3-21, 4-96
Station Message Detail Recording A-32
Station message detail recording
see "SMDR" 4-51
System
hold 4-18
speed dialing
DSLT 5-37, 6-33
key telephone 4-92
SLT 6-32
time and date control 3-22
System features 4-1
account codes 4-3
answer supervision for voice mail 4-6
auto day mode 4-7
auto set relocation 4-9
background music 4-11
battery backup 4-12
call forward ID code for voice mail 4-13
Caller ID 4-14, 4-15
centrex/PBX compatibility 4-16
circular hunting 4-47
DID 4-16
DID delayed ringing 4-18
DID night ringing assignment 4-17
DID/DNIS text name assignment 4-19
DISA 4-20
distinctive ringing 4-24
distributed hunting 4-49
door box 4-27
DP to DTMF signal conversion 4-29
DP/DTMF stations 4-29
hunting priority for VAUs 4-30
independent timers 4-32
LCR 4-33
longest idle hunting 4-49
music-on-hold 4-34
night service 4-35
non-verified account codes 4-3
OPX adaptor 4-39
paging 4-39
power failure transfer 4-41
remote maintenance 4-42
remote programming mode 4-42
remote programming using PCAS 4-44
sensor 4-28