Panasonic WV-SP302

28
ory card. When having a high frequency of overwrit-
ing, the lifetime of the SD memory card may
become shorter.
 • AlifetimeofaSDmemorycardshouldbeinflu-
enced by the number of the image files stored and
log savings on the SD memory card. Selecting
H.264 for "Recording format" can reduce the num-
ber of files to be stored on the SD memory card.
 • The data writing speed will go down after data are
repeatedly written down on an SD memory card.
[Recording format]
Select "JPEG" or "H.264" for the video encoding format
of images to be saved on the SD memory card.
JPEG: Records still image data.
H.264: Records video data in the MP4 video encoding
format.
Audio will not be recorded.
Default: JPEG
Note:
 • When"H.264"isselected,itwillbecomeimpossible
to transmit images with the settings of MPEG-4 or
H. 264(2).
 • When"H.264"isselected,thesettingsfor
"H.264(2)" on the [JPEG/H.264] tab of the "Image/
Audio" page will be changed to the settings for
"H.264 recording".
 • Whenthesettingvalueof"Videoencodingformat"
on the [JPEG/H.264] tab of the "Image/Audio" page
is changed from "H.264" to "MPEG-4", the setting
value of "Recording format" will automatically be
changed to "JPEG".
 • When"H.264/MPEG-4(2)"isselectedfor"Priority
stream" - "Stream type" on the [System] tab of the
"User mng." page, the priority band may not be
maintained.
 • WhenusingtheSDmemoryrecordingfunctionofa
Panasonic’s network disk recorder, select "JPEG"
for "Recording format".
 • Whenthesettingof"Recordingformat"ischanged
between "JPEG" and "H.264" , format the SD mem-
ory card. (☞ Page 31)
 • Duetothedifferenceinfileformats,theindicationof
remaining capacity of the SD memory card differs
[SD memory card]
Select "Use" or "Not use" to determine whether or not
to use the SD memory card.
Default: Use
Important:
 • Select"Notuse"whenoperatingwithoutaSD
memory card.
 • When the setting is changed between "Use" and
"Not use" while another user is during operation,
the operation will be canceled.
 • BeforeremovingtheSDmemorycardfromthe
camera, it is necessary to select "Not use" first.
 • AfterinsertingtheSDmemorycard,itisnecessary
to select "Use" to use the SD memory card.
 • Whenplayingordownloadingimagessavedonthe
SDmemorycard,itisnecessarytoselect"On"for
"Save logs" on the [Log] tab (☞ page 37) in
advance.
 • Whentheimagerefreshintervalisshort,notifica-
tion/recording timing or interval may become incor-
rect. Notification/recording may also not be per-
formed correctly as configured when multiple users
are receiving images. In this case, set the refresh
interval longer.
 • TherearelimitedtimestooverwriteonanSDmem-
Configure the settings relating to the SD memory card [SD memory card]
Click the [SD memory card] tab on the "Basic" page. (☞ Pages 22 and 23: How to display/operate the setup menu)
The settings relating to the SD memory card can be configured on this page.