Panasonic WV-SP302

71
Configure the settings relating to the face detection [Face detection]
Click the [Face detection] tab on the "Advanced func." page.
The settings relating to displaying the frame to be used for the face detection and the settings relating to the face
detection information attached to the image can be configured.
Important:
 • Thefacedetectionfunctionshallnotguaranteethedetectionoffacesinanimage.Thefacedetectionaccuracy
varies with imaging conditions.
■ Face detection
[Face detection]
Determine whether or not to enable the face detection
function.
On: Information about the face detection frame will be
attached and the test frame will be displayed on the
image of this page.
Off: Information about the face detection frame will not
be attached. No face detection frame will be dis-
played on the image of this page.
Default:Off
[XML notification]
The destination settings of the face detection informa-
tion can be configured.
When clicking "XML notification", the [XML notification]
tab will be displayed. (☞ Page 69)