Panasonic WV-SP302 - Configure the Settings Relating to the Schedules [Schedule]

86
Configure the settings relating to the schedules [Schedule]
Onthe"Schedule"page,itispossibletoconfigurethesettingsrelatingtoschedulesasfollows.
 • Alarmpermission(Alarminputwillbereceivedonlyinthespecifiedschedule.)
 • VMDpermission(Videomotiondetectionwillbeactiveonlyinthespecifiedschedule.)
 • Accesspermission(Accesstothecamerawillbeallowedonlyinthespecifiedschedule.)
(☞ pages 22 and 23: How to display/operate the setup menu)
Up to 5 schedules can be set.
Step 1
Select an action to be assigned to the schedule from
"Schedulemode"."Off"isselectedatthedefault.
Off: No action will be taken for the respective schedule.
Alarm permission: Alarm input (terminal alarm) will be
received during the period of the schedule.
VMD permission: The Video motion detection (VMD)
function will be active during the period of the
schedule.
Access permission: Users whose access level is set to
2 and 3 on the [User auth.] tab of "User mng." page
(☞ page 72) can access the camera only in the peri-
od of schedule.
Note:
 • Select"On"for"Userauth."onthe[User auth.] tab
of "User mng." page (☞ page 72)and"Off"for
"Host auth." on the "Host auth." page (☞ page 73)
to validate "Access permission".
Step 2
Select days of a week by checking the respective
checkboxes.
Step 3
Click [C] to select the start time and the end time of the
schedule.
Whennotdesignatingtime,checkthecheckboxof
"24h".
Step 4
Click the [Set] button after completing the settings.
→ The result will be displayed at the bottom of the
window.
Note:
 • Theschedulesdisplayedatthebottomofthewin-
dow can be identified by colors assigned to each
schedule.