Panasonic WV-SP302

6
Monitor images on a PC
The following are descriptions of how to monitor images from the camera on a PC.
Monitor images from a single camera
Important:
 • WhentheHTTPportnumberischangedfrom"80",
enter "http://IP address of the camera + : (colon) +
portnumber"intheaddressboxofthebrowser.
  (Example:http://192.168.0.11:8080)
 • WhenthePCisinalocalnetwork,configurethe
proxyserversettingofthewebbrowser(under
"InternetOptions…"under"Tools"ofthemenubar)
tobypasstheproxyserverforthelocaladdress.
Step 3
Press the [Enter] key on the keyboard.
→ The "Live" page will be displayed. Refer to page 8
for further information about the "Live" page.
When"On"isselectedfor"User auth.", the authentica-
tion window will be displayed before displaying live
images for the user name and password entries. The
default user name and password are as follows.
User name: admin
Password: 12345
Step 1
Start up the web browser.
Step 2
Enter the IP address designated using the Panasonic IP
setupsoftwareintheaddressboxofthebrowser.
Example when entering an IPv4 address:
http://URL registered using IPv4 address
http://192.168.0.10/
Example when entering an IPv6 address:
http://URL registered using IPv6 address
http://[2001:db8::10]/
<Example of IPv4 access>
<Example of IPv6 access>