Installation and Power supply facility
8
3.2 Installation transportation
When hanging this product for transportation, hang it at two eyebolts.
●The hoisting operation
●
During
hoisting operation, please do NOT use the handles.
●
When
the
machine is moved downwards by hoist, please be
sure to use the eye bolts and hang the machine with two points.
●The machine is carried by hands
●
When
the
machine is carried manually, single person can NOT
carry it on. More than one person are required to do this job.
Note:
●
If the eye bolts are missing or damaged, please contact with
the distributor of the Company.
●
Please purchase the genuine parts which comply with strength
assessment.
●
The model number of the eye bolt is R825M10
●Pushing the machine by hands
●
There are wheels under the machine. The machine can be pushed by hands. During moving, please do not
make sharp turn to protect wheels and floor.
●
Please do NOT place the machine on the slope 。 ( The Product has wheels, which cause the machine to
move on the inclined surface by itself. )
●Do not lift the product on your own.
As this product is heavy, it is dangerous to lift it on your own. Involve plural
number of persons with its lifting.
●Do not leave the product on a slope. (The product is provided with
casters.)
●When pushing this product for transportation, do not make a sharp turn,
or casters or floor may be damaged.
Storage, installation, transportation please do not pile up over two layers.
To Next Page