EasyManua.ls Logo

Pantum P1000 Series

Pantum P1000 Series
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- -
27
The meaning of the LED indicators
State
Description
Paper
(the red LED
indicator)
Data/print cartridge (the
multi-color LED indicator)
print
Ready
Printer warming up
Standby mode. Press the key to change the
printer from standby mode to warming up mode.
After warm up the printer is in the Ready state.
Receiving data.
Printer is receiving data from the computer, processing data
in memory, or printing.
Data has been transferred to the printer but it is not printing.
If the Ready LED indicator is flashing continually with no
output, press the Continue/cancel button to print the data
currently residing in memory.
There is no paper in the paper tray, or the paper in the tray
doesn't match the paper specified in the driver and the single
red indicator and the multi-color (green) indicator light is
flashing.
Paper jam. The single red indicator stays on, and the
multi-color (green) indicator flashes.
The flashing orange indicator when the printer is in ready
mode means the printer is low on toner.
Print cartridge error or toner is run out.
Other printer errors.

Table of Contents

Other manuals for Pantum P1000 Series

Related product manuals