2.4.2 Printing from manual feed slot
1) Load the first page of media to be printed into the manual feed slot, then print the
document.
• Adjust the manual insertion tray guide with both hands to fit the paper width that you
will load.
Note: The printer will start manual feed mode automatically when you load the paper into
manual feed slot. The manual feed slot has priority over the automatic paper tray. If
any media is present in the manual feed slot the printer will always print to that
media first.
• Load a piece of paper or an envelope into the manual insertion tray using both hands.
Note:
1) Load the paper on the manual insertion tray with the print side face up.
2) Make sure that the paper or transparencies are straight and in the correct position
on the manual insertion tray. Otherwise, it cannot feed the paper or
transparencies correctly and can cause output font inclination or paper jams.
3) Do not put multiple sheets on manual insertion tray; it may cause a paper jam.
• After finishing one sheet, load another sheet and repeat the above steps to continue
printing.
To Next Page
Loading...
Need help?
General