The Paper Out indicator on the control panel is on when no paper is fed in the manual
insertion slot, and it will be on until you load the paper or transparencies into manual insertion
tray.
2) For a multi-page document, load additional media into the manual feed slot one page at a
time as soon as the previous page has fed completely through the slot, until all pages have
been completed.
Note:
• Make sure the paper discharge extender is raised to avoid documents slipping for the
output bin. We suggest that you take each piece of media out of the document bin
immediately if you do not raise the paper discharge extender.
• When printing on transparencies please remove the printed output immediately
because stacked sheets of transparencies can lead to paper jams or paper stacking
problems.
To Next Page
Loading...
Need help?
General