E Cleaning Your Nebuliser Handset
14 eFlow
®
rapid nebuliser system – Questions about your device? Contact your service partner
Note: If necessary, clean the membrane of the aerosol head with
the easycare cleaning aid (not more than twice a week). Follow
the easycare instructions for use.
Step E6 Enter the easycare mode.
Press and hold-down the ON/OFF button (Fig. E6)
on the controller until the easycare screen appears
(Fig. E6b), then release the ON/OFF button. You
will hear one "beep" and see the easycare clean-
ing screen (Fig. E6c).
Fig. E6
Step E7 After backwashing follow the instructions provided
in chapter F for disinfecting your nebuliser handset
parts and the aerosol head.
Fig. E6a Fig. E6b Fig. E6c
Hold ON/OFF
button until
easycare
screen
appears
Release
ON/OFF
button
To Next Page
Loading...
