9-3 Technical Specifications
650 Series AC Drive
Environmental Details
Operating Temperature
0°C to 40°C
Storage Temperature
-25°C to +55°C
Shipping Temperature
-25°C to +70°C
Product Enclosure
Rating
IP20 (UL Open Type) suitable for cubicle mount only
Cubicle Rating Cubicle to provide 15dB attenuation to radiated emissions between 30-100MHz. It
must also require a security tool for opening
Altitude If >1000 metres (3300 feet) above sea level, derate Motor Power Rating by 1% per
100 metres (330 feet)
Humidity
Maximum 85% relative humidity at 40°C non-condensing
Atmosphere Non flammable, non corrosive and dust free
Climatic Conditions Class 3k3, as defined by EN50178 (1998)
Vibration
Test Fc of EN60068-2-6
10Hz<=f<=57Hz sinusoidal 0.075mm amplitude
57Hz<=f<=150Hz sinusoidal 1g
10 sweep cycles per axis on each of three mutually perpendicular axis
Safety
Pollution Degree
Overvoltage Category
Pollution Degree ll (non-conductive pollution, except for temporary condensation)
Overvoltage Category III (numeral defining an impulse withstand level)
Power Details
1-Phase Supply 220-240V ac ±10%,50/60Hz ±10%, ground referenced (TN) or
non-ground referenced (IT)
3-Phase Supply 220-240V or 380-460V ac ±10%,50/60Hz ±10%, ground referenced (TN) or
non-ground referenced (IT)
Supply Power Factor
(lag)
0.9 (@ 50/60Hz)
Output Frequency 0 – 240Hz
Overload 150% for 30 seconds
Maximum Supply Short
Circuit Rating
220-240V 1φ product -5000A, 220-240V 3φ product -7500A
380-460V 3φ product -10000A
User Relay
Terminals RL1A, RL1B.
Maximum Voltage 250Vac
Maximum Current 4A resistive load
Sample Interval 10ms
To Next Page
Loading...
