6.3 Measurement Views
The device can provide 3 different views to represent measurements.
You can edit the channels before carrying out a measurement.
► Further information on adjusting channels is available in Chapter & „Op-
tions: Edit Channels in the Measurement View (Edit Channels)“ on
Page41.
Changing the measurement view
You can switch between the individual measurement views:
Fig.18 Changing the measurement view
1 Swipe from right to left across the display.
Ä The next measurement view appears.
It is possible to switch between the individual measurement views while a mea-
surement is in progress.
37
The Parker Service Master COMPACT V1.0/02/24
Operation
To Next Page
Loading...
