8. Troubleshooting
This chapter contains information on dealing with faults and errors.
Problem Possible solution
Device cannot be switched on ► Charge the battery in the device
Device does not respond ► Reset the device (Reset)
Sensors are not displayed ► Check whether the channels are de-
activated, refer to & „Options: Edit
Channels in the Measurement View
(Edit Channels)“ on Page41
► Check the cabling is correct
► Check the connections for soiling
Always ensure that the latest version of the firmware is installed on the device.
► Further information on updating the firmware is available in Chapter & „Up-
dating the Firmware“ on Page86.
If you find no solution to your problem in this user manual, contact the relevant
sales outlet.
IMPORTANT
Risk of material damage through improperly performed repair work.
► Never open the device!
► Never attempt to perform repair work yourself!
► In the event of defects, return the device to the manufacturer!
84
The Parker Service Master COMPACT V1.0/02/24
Troubleshooting
To Next Page
Loading...
