6.4 Measurement Status
A measurement is started and stopped using the Start/Stop button or the yel-
low function key on the device.
The Start/Stop button indicates the current status of a measurement.
The following statuses are available:
Status Description
Measurement has not yet been started, adjustments can
be made.
Measurement is activated, the device is waiting for the
defined trigger to be triggered in order to record the measured
data.
Measurement is started and measured data is recorded.
1 Tap on the Start
button.
Ä The measurement starts up.
INFORMATION
Alternatively, press the yellow function key on the device.
Recording of the measured data begins according to the measurement method
selected, either immediately or after triggering one or several triggers.
The current running time of the measurement is displayed in the info line.
2 Tap on the Stop
button.
Ä The measurement is stopped.
49
The Parker Service Master COMPACT V1.0/02/24
Operation
To Next Page
Loading...
