Parker COMPACT - Setting VADC Channels

7.5.1 Setting VADC Channels
In the menus IN-1 ... IN-2 or CAN-1 ... CAN-6 you will find settings for param-
eterizing the input channels of the device.
INFORMATION
Each input channel has its own submenu with setting options. You can set the
channels independently of each other.
Fig.49 Setting VADC Channels
The following functions are available:
Designation Description
Channel Name Enter the channel name
Input Signal Set the input signal
(0...20mA, 4...20mA, 0...48V, -48...48V,
0...4A, -4...4A, 0...5kHz)
Measurement Range Set the start/end and units of the measurement
range to be displayed:
User specific, Pressure (bar), Tempera-
ture(°C), Flow (L/min), Rotational speed(1/
min), Volume (L), Power (kW)
72
The Parker Service Master COMPACT V1.0/02/24
Settings