6.5 Measuring Methods
The device is provided with the following measuring methods:
■ Start/Stop
■ Datalogger
Measured values are buffered in the working memory and stored in a USB
stick/the device's memory. The ACT, MIN and MAX values are saved.
You can switch between the measuring methods.
Fig.30 Measuring Methods
1 Tap on the Measuring method button.
INFORMATION
The button shows the currently selected measurement method.
2 Tap on the desired measurement method (Start/Stop, Datalogger).
Ä The selected measurement method is used.
INFORMATION
If the Datalogger measurement method is selected, the settings are dis-
played.
50
The Parker Service Master COMPACT V1.0/02/24
Operation
To Next Page
Loading...
