Parker COMPACT - Setting Display (Display;Energy)

7.7.1 Setting Display (Display/Energy)
In the Display/Energy menu, you will find settings for the display and reducing
the device's energy consumption.
Fig.53 Display (Device/Energy)
The following settings are available:
Designation Description
Brightness Adjust the display brightness in 5 steps
(0%, 25%, 50%, 75%, 100%)
Display dimming Adjust the period for dimming the display in 5 steps
(1min, 10min, 30min, 60min, Off)
Display filter Adjust display filter in 4 steps
(Low, Medium, High, Off)
Auto power off Switches the device on/off automatically. If this func-
tion is activated, the device switches off after 10
minutes without input. This function is automatically
deactivated during an ongoing measurement.
INFORMATION
The display filter only affects the displayed measured values.
Recorded measurements are not affected.
76
The Parker Service Master COMPACT V1.0/02/24
Settings