6.5.2 Datalogger
After selecting the Datalogger measurement method, the settings for carrying
out the measurement are displayed.
Fig.31 Datalogger measurement method, settings
1 Specify the settings according to your application.
2 Tap on the Start
button to start a measurement.
INFORMATION
When the Trigger is activated, the measurement only starts when a defined
measurement signal threshold is triggered.
3 Tap the Stop
button to stop the measurement.
INFORMATION
Alternatively, the measurement stops after the defined storage time has
elapsed (Storage time).
52
The Parker Service Master COMPACT V1.0/02/24
Operation
To Next Page
Loading...
