Peekel Instruments User manual PICAS V2.6.1
Page 14 of 59
2.2 Analog inputs on CA4AI
The analog DC-inputs are located on the CA4AI card, which can be ordered as a alternative
for a CA2CF card which has 2 carrier frequency channels.
At the back side of PICAS for each CA4AI card 4 detachable screw terminals with each 6
terminals are present, on which the signals/sensors can be connected.
Also each CA4AI cards holds another detachable screw terminals with 2 terminals. On this
terminals an 24VDC/80mA power supply is present which can be used as a power supply
for electronic sensors.
Figure 10: Backside of PICAS with 1 CA2CF-card and 1 CA4AI-card.
To Next Page
Loading...