Peekel Instruments User manual PICAS V2.6.1
Page 54 of 59
3.7.4 CA4AI menu: Tara
Controls and Functions
Auto-Tare <execute>
Tare provided by system
or adjustable (-100.0 ... + 100.0)
and selectable (pico- /... / milli-)
Unit provided by system
Use Tare selectable (Yes / No)
Functional Description
When a measured signal is at ‘zero’ level this command can be given. The presented value
will be corrected by the value displayed at the “Tare” line.
This correction is activated by the “Auto Tare” command.
The balance values are displayed and entered in the unit, displayed in this menu. The unit
value cannot be changed in this menu.
Device 1
To Next Page
Loading...