Peekel Instruments PICAS - Communication Ports; RS232 Interface; Usb

Peekel Instruments User manual PICAS V2.6.1
Page 20 of 59
2.4 Communication ports
2.4.1 RS232 interface
This port can be used to connect a COM-port of a PC. The Baudrate can be selected with
System Menu 02.
pin 1 : -
pin 2 : RXD
pin 3 : TXD
pin 4 : -
pin 5 : Ground
pin 6 : -
pin 7 : -
pin 8 : -
pin 9 : -
2.4.2 USB
This interface is only present on the fast controller. It is used for data communication
between the PICAS and the PC.
The PICAS is a USB device, and the USB connector on the back side is a type B
connector. It is a USB V1.1 interface.
When the PICAS has a USB interface, only 1 RS485 connector is present.