Peekel Instruments User manual PICAS V2.6.1
Page 28 of 59
cursor to the right and makes it a small edit- (underline-) character. Then the numbered
keys, the decimal dot, the +/- key and/or the exponent-keys can be used to type the
required value.
The <-EXP and EXP-> -keys switch the value-suffix or the physical unit suffix between
p, n, µ, m, none, k, M, G and T for micro, milli, none, kilo, mega, giga en tera.
Use ENTER to accept this edited value or CANCEL to restore the previous value.
Notice that, when channel-information is shown, at the bottom-left of the screen a
measurement of the amplifier-output voltage is shown.
This enables directly viewing the effect of the settings on the amplifier-status.
To Next Page
Loading...