pellenc C3X - Technical Features; General Characteristics of the Tool; Cutting Head Compatibility; Battery and Charger Compatibility

PRUNING SHEARS C3X
26_176804-B
3.2. TECHNICAL FEATURES
3.2.1. GENERAL CHARACTERISTICS OF THE TOOL
Cutting capacity 35 mm
Pruning shears power supply voltage 10.8 V
Maximum electrical power 800 W
Battery life According to the use
Weight of pruning shears 745 g
Dimensions 301 x 114 x 49 mm
330.1 x 116 x 52 mm with the battery
3.2.2. CUTTING HEAD COMPATIBILITY
Series production Ø35 mm Feather
Optional (fitted by dealer) Ø35 mm Standard
3.2.3. BATTERY AND CHARGER COMPATIBILITY
Battery Charger
ALPHA LITE CB1220LV
CB1220LV_1B
3.2.4. VIBRATION AND NOISE EMISSION VALUES
The determination of noise levels and vibration rates is based on operating conditions at maximum rated speed
according to a standardised test method. It can be used to compare two machines.
Sound pressure values
Maximum sound pressure level at the user's position
(uncertainty K
pA
: 1.5 dB (A))
L
pa
= 66 dB (A)
Sound power values
Measured sound power level L
WA
(uncertainty K
WA
: 0.6 dB(A)) L
WAm
= 73,13 dB
Guaranteed sound power level L
WAg
L
WAg
= 74 dB
The recording of the measured sound power level and the guaranteed sound power level was carried out in
accordance with a procedure laid down in Directive 2000/14/EC Annex V.
Vibration values
Vibration emission values at the handle determined in accordance with EN
50636-2-100
a
h
= 1.128 m/s²
The total declared values for vibration and noise emissions can be used for a preliminary exposure assessment.
14