PRUNING SHEARS C3X
26_176804-B
5. Pinch the battery's buttons.
6. Disconnect the battery.
5.3.2. HALF-OPENING OF THE BLADE
Important
The tool must be switched off, see 5.5. Switching off the pruning shears, page 25.
1. Press and hold down the ON/OFF button (1).
The tool will emit a series of beeps to indicate that
it is switching on.
Do not release the ON/OFF button (1).
2. Release the ON/OFF button (1) as soon as the tool
emits a new series of beeps.
3. Hold down the trigger (2) until the tool emits a
series of beeps.
Note
If the procedure has not been validated, the
tool emits a series of beeps. Switch off the
tool and start again from step 1.
23
To Next Page
Loading...
