pellenc C3X - Introduction

PRUNING SHEARS C3X
26_176804-B
1. INTRODUCTION
Dear Customer,
Thank you for purchasing your Pruning shears C3X. Properly used and maintained, this equipment will give you
years of satisfaction.
Warning
In accordance with product liability laws, we are not responsible for damage caused by our
product if the product includes an accessory that is not from the manufacturer or is not approved
by the manufacturer. The use of any other accessory may increase the risk of injury.
Warning
Your device contains numerous recoverable or recyclable materials. Return it to your
dealer or, failing this, to an approved servicing centre to be treated.
Comply with the regulations in force in your country as concerns environmental protection associated with your
activity.
Warning
It is imperative that you read through the ENTIRE user’s manual guide before using or servicing
the tool. Always comply with the instructions and illustrations in the manual.
Throughout the user’s manual guide you will find advisory notes and information entitled: NOTE, IMPORTANT,
ATTENTION and WARNING.
Points marked “NOTE” indicate additional information.
Points marked "IMPORTANT" warn the user of a potential risk for the equipment.
Points marked “CAUTION” warn the user of a potentially hazardous situation which if not avoided may result in
minor injuries.
Points marked “WARNING” warn the user of a potentially hazardous situation which if not avoided may result in
serious injury or death.
The warning indicates that damage resulting from failure to comply with the procedures and instructions is not
covered by the warranty and the owner will be liable for any repair costs.
Safety signs on the tool also indicate the safety precautions to be observed. Locate these signs and read them
before using your machine. Any partially illegible or damaged sign should be replaced immediately.
Refer to 2.7. Safety signs, page 11 for the location diagram of the safety stickers affixed to the tool.
No part of this manual may be reproduced without the written permission of the PELLENC company. The illustrations
provided in this manual are for information purposes only and are in no way contractual. The PELLENC company
reserves the right to make any modification or improvement to its products as deemed necessary without informing
customers already in possession of a similar model. This manual forms an integral part of the tool and must
accompany the tool if it changes hands.
5