PRUNING SHEARS C3X
26_176804-B
2. SAFETY
2.1. INTENDED USAGE
• The Pruning shears C3X is intended for vineyard, fruit-tree, olive-growing and landscape maintenance pruning
up to a diameter of 35 mm.
• The Pruning shears C3X must be operated from the ground or a suitable fully stable and secure platform.
• The Pruning shears C3X is only intended for outdoor use.
• Only original or manufacturer approved spare parts (e.g. blade kit, maintenance kit) may be fitted to the Pruning
shears C3X.
• Any other use of this tool is not intended.
• The company PELLENC accepts no responsibility for any damage caused by improper or unspecified use different
from its original intention.
• The user is responsible for any accident resulting from improper use or unauthorized modification of this tool.
• The company PELLENC accepts no responsibility for any damage caused by the use of non-original parts or
accessories.
2.2. GENERAL SAFETY INSTRUCTIONS FOR THE ELECTRICAL TOOL
Warning
Read all safety warnings, instructions, illustrations and specifications provided with this
power tool. Failure to follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
Note
Retain all the safety measures and instructions for later reading.
The term "power tool" in the safety warnings refers to your battery-powered electric tool (without power cord).
2.2.1. WORK AREA SAFETY
1. Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
2. Do not operate power tools in an explosive atmosphere, for example in the presence of flammable
liquids, gases, or dust. Power tools create sparks, which can ignite dust or fumes.
3. Keep children and bystanders away while operating the power tool. Distractions can cause you to lose
control of the tool.
2.2.2. ELECTRICAL SAFETY
1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use adapter plugs with
earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is in direct contact with the ground.
3. Do not expose power tools to rain or damp conditions. Water entering a power tool will increase the risk
of electric shock (Except for tools for which an "IP" index is specified).
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges, and moving parts. Damaged or entangled cords increase the risk
of electric shock.
5. Use an extension cord suitable for outdoor use when operating power tools outdoors. Use a cord suitable
for outdoors to reduce the risk of electric shock.
6
To Next Page
Loading...
