pellenc C3X - Maintenance; Management of the Recycling and Recovery of Waste from Your Tool; Safety Measures Related to the Use of the Battery and the Charger; Pellenc

PRUNING SHEARS C3X
26_176804-B
4. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
5. Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk of injury.
6. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature
above 130°C (or 265°F) may cause explosion.
7. Follow all charging instructions and do not charge the battery pack or tool outside the temperature
range specified in the instructions. Charging improperly or at temperatures outside the specified range may
damage the battery and increase the risk of fire.
2.2.6. MAINTENANCE
1. Have the power tool serviced by a qualified technician, using only identical spare parts. This will ensure
that the safety of the power tool is maintained.
2. Never service damaged battery packs. Service of battery packs should only be performed by the
manufacturer or authorized service providers.
2.2.7. MANAGEMENT OF THE RECYCLING AND RECOVERY OF WASTE FROM YOUR TOOL
1. When the tool reaches the end of its life, PELLENC provide the end-of-life sheet of the equipment. The
end-of-life sheet provides instructions for safely removing components.
2.3. SAFETY MEASURES RELATED TO THE USE OF THE BATTERY AND THE CHARGER
PELLENC
Note
See the operating instructions for the battery.
Warning
Read all safety warnings and all instructions. Retain all the safety measures and instructions
for later reading.
8