pellenc C3X - Start-Up; Content of the Carry-Case; Connecting the Battery to the Tool; Disconnecting the Battery from the Tool

PRUNING SHEARS C3X
26_176804-B
4. START-UP
Note
For more information on the use of the battery, refer to the battery operating instructions.
4.1. CONTENT OF THE CARRY-CASE
Check that the tool is delivered with:
• 1 C3X pruning shears
• 2 Alpha Lite batteries
• 1 cutting head tightening spanner
• 1 sharpening stone
• 1 grease gun
• 1 tube of grease
• 1 operating instructions manual
• 1 marketing flyer
4.2. CONNECTING THE BATTERY TO THE TOOL
1. Check the tool and battery connectors for
contamination.
2. Insert the battery until you hear it click into place.
4.3. DISCONNECTING THE BATTERY FROM THE TOOL
1. Pinch the battery's buttons.
2. Disconnect the battery.
16