BRUSH CUTTER EXCELION 2 DH
53_153238-A
Vibration values
Vibration values measured at maximum rated speed*
a
h
value of the right
handle measured in m/s²
a
h
value of the left
handle measured in m/s²
TAP CUT 3 (strimmer wire Ø 2.7 mm) 1.98 1.98
TAP CUT 2 (strimmer wire Ø 2.7 mm) 2.86 2.83
Twin-blade 2.89 3.58
Tri-blade 2.58 1.92
Mulching 2.91 2.54
Chisel-tooth saw 1.70 1.56
CITY CUT 2.12 1.83
*Measurement uncertainty: KWA = 2 m/s²
The total declared values for vibration and noise emissions can be used for a preliminary exposure assessment.
Caution
Vibrations during actual working use of the machine may differ from the total declared value, depending on
the way the machine is used
It is necessary to identify safety measures to protect the operator, based on an estimate of exposure under
actual operating conditions (taking into account all parts of the operating cycle, such as the time the machine
is switched off and the time it is idling, in addition to the working time).
17
To Next Page
Loading...
