pellenc EXCELION 2 DH - Tips for Use and Working Techniques; Choice of the Right Cutting Head According to the Use

BRUSH CUTTER EXCELION 2 DH
53_153238-A
-
5.5.3.7. DISPLAYING THE SOFTWARE VERSION OF THE HMI
1. Access the "Information" menu (refer to Sec-
tion 5.5.3, « "Information" menu and access to ma-
chine settings ».
2. Click several times on the POWER/MENU button (9)
to access menu "7--HMI SOFT".
The screen displays the software version of the HMI.
Note
This value cannot be reset.
-
5.5.3.8. DISPLAYING THE SOFTWARE VERSION OF THE MOTOR BOARD
1. Access the "Information" menu (refer to Sec-
tion 5.5.3, « "Information" menu and access to ma-
chine settings ».
2. Click several times on the POWER / MENU button
(9) to access menu "8--TOOL SOFT".
The screen displays the software version of the mo-
tor board.
Note
This value cannot be reset.
5.6. TIPS FOR USE AND WORKING TECHNIQUES
5.6.1. CHOICE OF THE RIGHT CUTTING HEAD ACCORDING TO THE USE
Whether you want to clean or beautify your green space, remove tall grass, wild shoots, thickets or bushes cluttering
up a path, for each use of your Brush cutter Excelion 2 DH, there are a suitable PELLENC cutting head. It is therefore
important to choose the right cutting head according to the intended job.
58